Need help?Do you have a question about the Raymarine AXIOM+ Series and is the answer not in the manual?
General| Display Sizes | 7", 9", 12", 16" |
|---|---|
| Display Type | IPS LCD |
| Touchscreen | Yes |
| Operating System | LightHouse 3 |
| Waterproof Rating | IPX6/IPX7 |
| RAM | 4 GB |
| Internal Storage | 16 GB |
| Radar Support | Yes |
| Chartplotter | Yes |
| Brightness | 1500 nits |
| Processor | Quad-core |
| Connectivity | Wi-Fi, Bluetooth |
| GPS | Built-in GPS/GLONASS |
| Networking | NMEA 2000 |
| Sonar | Supports CHIRP, RealVision 3D, SideScan, DownVision |
| Video Input | Yes |
| Operating Voltage | 12/24 V DC |
| Display Resolution | 7" - 1024 x 600 (WVGA); 9" - 1280 x 720 (HD); 12" - 1280 x 800 (WXGA); 16" - 1920 x 1080 (Full HD) |
Explains limitations of warranty and product accuracy.
Details FCC/ISED compliance for radio frequency exposure limits.
States compliance with FCC rules, including interference conditions.
Describes FCC limits for Class B digital devices and potential interference.
Details compliance with Industry Canada's license-exempt RSS standards.
Provides guidance for radio station interference in Japan.
Warning statement for radio devices in Korea regarding interference.
Declares product compliance with EMC Directive 2014/53/EU.
Guidance on disposing of the product according to WEEE Directive.
Instructions on registering the product for warranty benefits.
Notes on document accuracy and policy of product improvement.
Lists available documentation and part numbers for the product.
Identifies the specific Axiom+ Multifunction Displays this document applies to.
Lists transducers compatible with Axiom+ RV Multifunction displays.
Details parts included with Axiom 7+ and 7+ (DISP) models.
Details parts included with Axiom 9+ and 12+ models.
Details parts included with Axiom 9+ (DISP) and 12+ (DISP) models.
Guide to choosing an optimal mounting location considering various factors.
Overview of different ways the product can be mounted.
Instructions for mounting using the bracket and trunnion mechanism.
Steps for flush and surface mounting the Axiom 7 model.
Procedures for surface or flush mounting using the rear mount kit.
Details the rear view of the Axiom+ and its connectors.
Explains how to connect the MFD to a 12V DC power supply and distribution.
Describes how to connect the MFD to an NMEA 2000 network.
Details how to connect transducers to the MFD.
Explains connecting the MFD to other devices via RayNet or SeaTalkhs.
Describes connecting accessories like the RCR-SDUSB.
Covers routine checks, warnings, and general service advice.
Provides best practices for cleaning the display screen, case, and sun cover.
General information on diagnosing and correcting product problems.
Explains LED status indicators for troubleshooting MFD errors.
Addresses issues with the product not turning on or restarting.
Solutions for problems related to GNSS/GPS signal reception.
Guides for resolving issues with sonar image display and depth readings.
Steps to resolve problems with Wi-Fi connection and performance.
Solutions for issues where the touchscreen does not operate as expected.
Addresses general problems like erratic behavior and system crashes.
Information on contacting Raymarine for warranty, service, and repairs.
Details on video tutorials, training courses, and support forums.
Detailed technical specifications for Axiom+ models (Power, LCD, Data).
Technical details specific to RealVision 3D sonar features.
Technical details for the internal GNSS (GPS/GLONASS) receiver.
Lists various accessories for Axiom MFDs, including installation kits and suncovers.
Lists spare parts for Axiom MFDs, such as cables and mounting kits.
Details RayNet to RayNet and RayNet to RJ45 cables and adapters.
Lists cables and accessories for the SeaTalkng network system.
To Next Page