EasyManua.ls Logo

Raymarine axiom 9 - User Manual

Raymarine axiom 9
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2017 Raymarine UK Limited
87298-1Document number:
04-2017Date:
English (en-US)
Installation instructions

Table of Contents

Questions and Answers

  • S
    Seth McguireAug 19, 2025
    What to do if Raymarine GPS product will not boot up?
    • R
      Rebecca CochranSep 12, 2025
      If your Raymarine GPS product won't boot up, it could be due to power supply and connection issues. Refer to the solutions for 'Product does not turn on or keeps turning off'. Alternatively, the software might be corrupted. Try re-flashing the latest software from the Raymarine website. As a last resort, on display products, you can perform a ‘Power on Reset’, but this will delete all settings, presets, and user data.
  • B
    batesheatherAug 23, 2025
    Why does my Raymarine GPS keep turning off?
    • V
      Victoria GouldAug 25, 2025
      Your Raymarine GPS might be turning off due to several reasons: a blown fuse or tripped breaker (check and replace if necessary, and inspect for cable damage if it keeps blowing), a poor or damaged power supply cable or connection (ensure the cable is fully inserted, check for damage or corrosion, and flex the cable to check for loose connections), incorrect power connection (ensure the installation instructions were followed), or an insufficient power source (check the power supply voltage with a multi-meter under load).
  • N
    nguyenbenjaminAug 26, 2025
    How to fix a Raymarine axiom 9 that won't turn on?
    • I
      Isaiah EwingAug 26, 2025
      If your Raymarine Monitor doesn't turn on or keeps turning off, here are some things to check: * Make sure the relevant fuses and breakers are in good condition and properly connected; replace them if needed. * Verify the power cable is correctly oriented, fully inserted into the display connector, and locked in place. * Confirm the power supply is wired correctly, referring to the installation instructions if necessary.
  • R
    Regina FisherAug 29, 2025
    What to do if Raymarine Monitor connection is slow or keeps dropping?
    • J
      Jeffery WatsonAug 30, 2025
      If your Raymarine Monitor's connection is slow or keeps dropping, it might be due to: * Wi-Fi performance degrades over distance. Move devices closer together. * Interference being caused by other Wi-Fi enabled or older Bluetooth enabled devices. Change the Wi-Fi Channel of the device you are trying to connect to and retry the connection. * Interference from devices on other vessels. Change the Wi-Fi Channel of the device you are trying to connect to and retry the connection.
  • J
    johnsonkaylaSep 1, 2025
    How to troubleshoot a Raymarine axiom 9 Monitor that cannot find a network?
    • K
      Kevin HodgeSep 1, 2025
      If your Raymarine Monitor cannot find a network, consider the following: * Ensure Wi-Fi is enabled on both Wi-Fi devices and rescan available networks. * Some devices may automatically turn off Wi-Fi when not in use to save power. Power cycle / reboot devices and rescan available networks. * Try to enable broadcasting of the device’s network using the Wi-Fi settings on the device you are trying to connect to. * Move devices closer together or, if possible remove the obstructions and then rescan available network.
  • P
    Paul KellySep 5, 2025
    What to do if Raymarine axiom 9 Monitor touchscreen is not working?
    • N
      Nicole GriffinSep 5, 2025
      If the touchscreen on your Raymarine Monitor is not working as expected: * Check if TouchLock is enabled. Swipe your finger from left to right across the Power button swipe area to de-activate the TouchLock. * Ensure you are operating the screen with bare fingers. Bare fingers must make contact with the screen for correct operation. * If there are water deposits on the screen, carefully clean and dry the screen in accordance with the instructions provided.
  • O
    ospenceSep 9, 2025
    Why does my Raymarine Monitor display behave erratically?
    • C
      Christopher SmithSep 10, 2025
      If your Raymarine Monitor is behaving erratically with frequent unexpected resets, system crashes, or other erratic behavior, consider the following: * Intermittent problem with power to the display: Check relevant fuses and breakers. * Software mismatch on system (upgrade required): Go to www.raymarine.com and click on support for the latest software downloads. * Corrupt data / other unknown issue: Perform a factory reset. Important: This will result in the loss of any settings and data (such as waypoints) stored on the product.
  • S
    Shaun WilsonSep 12, 2025
    Why is the Raymarine axiom 9 mobile application running slowly or not at all?
    • D
      Deanna AllenSep 12, 2025
      If the mobile application for your Raymarine Monitor is running slowly or not at all, check these things: * Raymarine app not installed: Install mobile app from relevant app store. * Raymarine app version not compatible with MFD software: Ensure mobile app and MFD software are latest available versions. * Mobile apps not enabled on MFD: Enable “Viewing only” or “Remote Control” as required in the Mobile Apps setting on your MFD.
  • A
    Amber BoydSep 14, 2025
    What to do if Raymarine axiom 9 will not start up (restart loop)?
    • S
      Susan FischerSep 14, 2025
      In the unlikely event that the Raymarine Monitor will not start up (restart loop) due to software corruption, try downloading and installing the latest software from the Raymarine website.
  • X
    xharrisonSep 16, 2025
    Why does my Raymarine axiom 9 Monitor show a “No Fix” GNSS status?
    • C
      Caroline RoweSep 16, 2025
      The “No Fix” GNSS status icon on your Raymarine Monitor may be displayed due to: * Geographic location or prevailing conditions preventing satellite fix. Check periodically to see if a fix is obtained in better conditions or another geographic location. * GNSS (GPS) connection fault. Ensure that external GNSS connections and cabling are correct and fault free. * External GNSS (GPS) receiver in poor location. Ensure GNSS (GPS) receiver has a clear view of the sky. * GNSS (GPS) installation problem. Refer to the installation instructions.

Summary

Installation Procedures

Location Selection Guidelines

Factors for choosing an optimal installation location.

Mounting Method Options

Overview of Trunnion, Flush, Surface, and Front mounting methods.

Trunnion Bracket Installation

Step-by-step guide for trunnion mounting the display.

Connections and Wiring

Power Cable Installation

Instructions for connecting the power supply and details on fuse ratings.

Transducer Cable Connections

Connecting various sonar transducers including RealVision and DownVision.

Troubleshooting Common Issues

Power and Boot-up Issues

Solutions for devices not powering on or experiencing boot loops.

GNSS and Sonar Problems

Troubleshooting navigation (GNSS) and sonar performance issues.

Technical Support and Learning

Product Support and Service Contacts

How to contact Raymarine for product support, service, and repairs.

Technical Specifications

Axiom Display Specifications

Technical data for Axiom 7, 9, and 12 models including power, LCD, and connectivity.

Raymarine axiom 9 Specifications

General IconGeneral
Display Size9 inches
TouchscreenYes
ConnectivityWi-Fi, Bluetooth, Ethernet
Operating SystemLightHouse 3
Waterproof RatingIPX6 and IPX7
Power Consumption (Max)20W
BluetoothYes
NMEA0183Yes
NMEA2000Yes
ProcessorQuad Core
Internal Storage16GB
Brightness1, 200 nits
Operating Temperature-25°C to +55°C
Storage Temperature-30°C to +70°C
Voltage12V DC
GPSBuilt-in GPS
Video Input1x Composite video input
SonarDownVision, SideVision
CartographyRaymarine LightHouse Charts, Navionics, C-MAP
Resolution1280 x 720 pixels

Related product manuals