www.Busse-Yachtshop.de - info@busse-yachtshop.de
Chapter 2: Planning the installation 13
2.2 Installation overview
Your installation will include the following activities:
2.3 A-Series systems
The A-Series display can be used in a number of system types.
Some examples of which are outlined in this section.
Core system
The core A-Series system consists of:
• A-Series multi-function display
• Internal GPS antenna
• Sonar transducer on fishfinder (D) models only.
Installation task Refer to
1 Plan your system - Chapter 2: Planning the
installation
- All installation instructions
2 Obtain all required equipment and
tools.
- Pack contents on page 16
- Tools on page 17
- Chapter 9: Accessories
3 Site all equipment. - Chapter 4: Location and
mounting
4 Route all cables. - Chapter 3: Cables and
connections
5 Drill cable and mounting holes. - Bracket mounting on
page 32
- Panel mounting on
page 35
6 Make all connections into equipment. - Chapter 3: Cables and
connections
7 Secure all equipment in place. - Bracket mounting on
page 32
- Panel mounting on
page 35
8 Power on test the system. - System checks on page 37
D11355-1
A-Series display
Sonar
transducer
Power IN
To Next Page
Loading...
