Raymarine a95 Mounting And Getting Started

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

M

ounting and Getting Started

ENGLIS H

Date : 05-2014

Docume nt numbe r: 88032-1-EN

© 2014 Ra yma rine UK Limite d

a9x / a12x

EN

a9x/a12x

Table of Contents

Other manuals for Raymarine a95

Installation And Operation Instructions464 pages

Operation Instructions390 pages

Questions and Answers:

L
Laurie HernandezAug 29, 2025
Why does my Raymarine Marine Equipment show a “No Fix” GPS status?
- H
  Hannah WillisAug 30, 2025
  If the Raymarine Marine Equipment displays a “No Fix” GPS status icon, it could be due to several reasons. The geographic location or current conditions might be preventing a satellite fix; in this case, check periodically to see if a fix is obtained in better conditions or another geographic location. Alternatively, there may be a GPS connection fault, so ensure that external GPS connections and cabling are correct and fault free. Finally, the external GPS antenna might be poorly positioned, so ensure the GPS antenna has a clear view of the sky.
D
Dr. Vanessa MitchellAug 29, 2025
How to fix a Raymarine a95 Monitor radar that will not initialize (Voltage control module (VCM) stuck in “sleep mode”)?
- K
  Kathryn KennedyAug 29, 2025
  If your Raymarine Monitor radar will not initialize because the Voltage Control Module (VCM) is stuck in 'sleep mode', check the power connection at the VCM. Ensure the voltage at the input is 12/24V and the voltage at the output is 40V.
J
Joel NguyenAug 28, 2025
What does it mean if my Raymarine a95 Monitor displays 'No Data' or 'No scanner message'?
- D
  Diane OlsonAug 28, 2025
  If your Raymarine Monitor displays 'No Data' or 'No scanner message', check the scanner power supply cable to ensure it's sound and connections are tight and free from corrosion. Also, check that the scanner is correctly connected to a Raymarine network switch or SeaTalkhs crossover coupler, as applicable. Ensure the scanner pedestal switch is in the ON position.
A
Amanda AllisonAug 27, 2025
What to do if my Raymarine a95 will not boot up (re-boot loop)?
- C
  Carlos SantanaAug 27, 2025
  If your Raymarine Monitor will not boot up, it could be due to the power supply and connection issues. Also, in the unlikely event that the product's software has become corrupted, please try re-flashing the latest software from the Raymarine website. On display products, as a last resort, you can try to perform a ‘Power on Reset’; however, this will delete all settings/presets and user data and revert the unit back to factory defaults.
H
Hannah FrankAug 27, 2025
What to do if my Raymarine a95 displays a “No Fix” GPS status icon?
- M
  michael52Aug 27, 2025
  If your Raymarine Monitor displays a 'No Fix' GPS status icon, it could be due to your geographic location or prevailing conditions preventing a satellite fix (check periodically in better conditions or another location), a GPS connection fault (ensure external GPS connections and cabling are correct), or an external GPS antenna in a poor position (ensure the GPS antenna has a clear view of the sky).
D
Diana NewmanAug 26, 2025
Why does my Raymarine a95 Monitor not turn on or keep turning off?
- C
  Crystal GardnerAug 26, 2025
  Your Raymarine Monitor might not be turning on or keeps turning off due to several reasons: a blown fuse or tripped breaker (check and replace if necessary, and inspect for cable damage if fuses repeatedly blow), a poor or damaged power supply cable or connections (ensure the cable is fully inserted and locked, check for damage or corrosion, and flex the cable to check for reboots), incorrect power connection (ensure the installation instructions have been followed), or an insufficient power source (check the power supply voltage under load).
D
Dr. James RoseAug 23, 2025
What to do if my Raymarine Monitor shows no depth reading or lost bottom lock?
- B
  Bonnie BatesAug 25, 2025
  If your Raymarine Monitor shows no depth reading or has lost bottom lock, check the transducer location to ensure it's installed correctly. Also, verify the transducer angle, adjusting if it's too great. If the transducer has a kick-up mechanism, ensure it hasn't kicked up. Check the power supply voltage under load, and inspect the transducer for damage or fouling.
T
Tara GomezSep 6, 2025
Why is instrument data missing from some Raymarine Marine Equipment displays?

Raymarine a95 Specifications

General

Display Size	9 inches
Display Resolution	800 x 480 pixels
Display Type	LCD
Touchscreen	Yes
Waterproof Rating	IPX6 and IPX7
GPS	Yes
Cartography	Navionics, C-MAP
Sonar	Yes
Operating Temperature	-15°C to 55°C
Networking	NMEA 2000, Wi-Fi
Storage Temperature	-25°C to 70°C

Related product manuals

Preview: Raymarine A50

Raymarine ALPHA

Preview: Raymarine axiom 7

Raymarine axiom 7

Raymarine Axiom 7+

Raymarine axiom 12

Raymarine Axiom 12+

Raymarine Axiom 9+ RV

Preview: Raymarine A Series A50

Raymarine A Series A50

Preview: Raymarine AXIOM+ Series

Raymarine AXIOM+ Series