To Next Page
C
Charles WadeDec 3, 2025
Why is my Raymarine Monitor not showing depth reading or lost bottom lock?
Why is my Raymarine Monitor not showing depth reading or lost bottom lock?
Safety warnings for installation, operation, and high voltage hazards.
Guidelines for choosing an optimal installation location, including safety warnings, environmental factors, and RF interference considerations.
Discusses various methods available for mounting the MFD, including bracket and surface options.
Instructions for mounting the MFD using the supplied trunnion bracket on horizontal or overhead surfaces.
Procedures for flush or surface mounting the Axiom 7 model after removing the trunnion adaptor.
Detailed instructions for connecting the MFD to the vessel's 12 V DC power supply, including fuse requirements.
Steps to resolve issues when the MFD won't turn on, keeps turning off, or requires a factory reset.
Diagnosing and resolving problems with sonar image display, readings, and transducer connections.
Troubleshooting steps for Wi-Fi network connection, signal issues, and performance problems.
Detailed technical data for Axiom MFD models, including power, environmental, LCD, and data connections.
General| Display Type | LCD |
|---|---|
| Interface | Touchscreen |
| Resolution | 800 x 480 |
| Waterproof Rating | IPX6 |
| Connectivity | NMEA2000 |
| Cartography | Navionics+, C-MAP |
| Operating Temperature | +55°C |
| Power Supply | 12/24 V DC |
| GPS | Integrated |