Raymarine e95 Mounting And Getting Started

28 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

M

ounting and Getting Started

Englis h

Date: 04-2012

Document numbe r: 88001-2

© 2012 Ra yma rine UK Limited

e 7 / e 7 D / e 9 5 / e 9 7 / e 1 2 5 /

e 1 2 7 / c 9 5 / c 9 7 / c 1 2 5 / c 1 2 7

e7/e7D/e95/e97/e125/e127/c95/c97/c125/c127

Table of Contents

Other manuals for Raymarine e95

Operation Instructions388 pages

Operation Instructions390 pages

Installation And Operation Handbook270 pages

Questions and Answers:

A
Allison GilbertSep 2, 2025
Why won't my Raymarine Marine Equipment connect wirelessly?
- R
  robertbaileySep 2, 2025
  If you have no wireless connection on your Raymarine Marine Equipment, ensure that Wi-Fi is enabled on the multifunction display (Homescreen: > Set-Up > System Settings > Wireless Connections > Wi-Fi > On). Also, make sure that the 'Wi-Fi' option is enabled on the iPhone and that the Raymarine connection is selected as the Wi-Fi network. If a passcode has been specified for the multifunction display's Wi-Fi connection, ensure that the same passcode is entered into the iPhone when prompted.
G
Gina TorresAug 25, 2025
How to troubleshoot Raymarine Marine Equipment that won't start?
- E
  ewalshAug 25, 2025
  If your Raymarine Marine Equipment system or part of it does not start up, there could be a power supply problem. Check the relevant fuses and breakers. Also, verify that the power supply cable is in good condition and that all connections are tight and free from corrosion. Finally, ensure that the power source provides the correct voltage and sufficient current.
J
Jennifer ConleyAug 25, 2025
What causes Raymarine Monitor to have problematic depth readings or sonar image?
- B
  Barbara PerryAug 26, 2025
  Problematic depth readings or sonar images on your Raymarine Monitor can stem from several causes. Start by checking the sounder presets, gain, and frequency settings, as they may be inappropriate for the current conditions. Inspect the power supply voltage, as a low voltage can affect the unit's transmitting power. Ensure all cables (power, transducer, etc.) are properly connected and undamaged. Check that the transducer is correctly mounted, clean, and within 10° of vertical. If you have a transom-mount transducer, make sure it hasn’t been kicked up. Adjust scroll speed.
G
Gabriel WilliamsSep 8, 2025
Why is the bearing of a target on the Raymarine Monitor radar screen incorrect?
- N
  ncortezSep 8, 2025
  If the bearing of a target on the Raymarine Monitor radar screen is incorrect, it's likely that the radar bearing alignment needs adjusting. Check and adjust the radar bearing alignment.
M
micheal15Sep 14, 2025
Why is the touchscreen on my Raymarine Marine GPS System not working correctly?
- N
  Nathan RaySep 14, 2025
  If your Raymarine Marine GPS System's touchscreen isn't working as expected, first ensure that touch lock is disabled using the Trackpad on the home screen. Make sure you're using bare fingers on the screen. Calibrate the touchscreen via the setup menus. Clean and dry the screen carefully if there are saltwater deposits.
J
John PetersonSep 5, 2025
Why can't I control my media player with Raymarine Marine Equipment?
- R
  robertoochoaSep 5, 2025
  If you have no media player control on your Raymarine Marine Equipment, check the Bluetooth compatibility with the device manufacturer to ensure the media player device is compatible with Bluetooth 2.1+ EDR power class 1.5 (supported profile: AVRCP 1.0) or higher. If the device is not compatible, it is not suitable for wireless use with the multifunction display. Enable “Audio Control” ( Homescreen: > Set-Up > System Settings > Connections > Connections Manager > Audio Control > On).
J
Joanne SummersAug 30, 2025
How to fix incorrect radar bearing on Raymarine Marine Equipment?
- M
  Mark JosephAug 30, 2025
  If the radar bearing of a target on the Raymarine Marine Equipment screen is incorrect, check and adjust the radar bearing alignment.
L
Lawrence GonzalesSep 12, 2025
Why does my Raymarine Marine GPS System say “No Fix”?
- J
  Jennifer SmithSep 12, 2025
  If the Raymarine Marine GPS System displays a “No Fix” GPS status icon, it could be due to geographic location or prevailing conditions preventing a satellite fix. Check periodically to see if a fix is obtained in better conditions or another geographic location. Also, ensure that external GPS connections and cabling are correct and fault free. Make sure the GPS antenna has a clear view of the sky. For installation issues, refer to the installation instructions.
K
Kelsey HayesAug 27, 2025
Why does my Raymarine Marine Equipment show a “No Fix” GPS status?
- R
  Randy RobinsonAug 27, 2025
  If the Raymarine Marine Equipment displays a “No Fix” GPS status icon, it could be due to several reasons. The geographic location or current conditions might be preventing a satellite fix; in this case, check periodically to see if a fix is obtained in better conditions or another geographic location. Alternatively, there may be a GPS connection fault, so ensure that external GPS connections and cabling are correct and fault free. Finally, the external GPS antenna might be poorly positioned, so ensure the GPS antenna has a clear view of the sky.
J
Jake LeeAug 28, 2025
What to do if Raymarine Marine Equipment shows no data or scanner message?
- T
  Tammy GarciaAug 28, 2025
  If you have no data or are receiving a 'No scanner' message on your Raymarine Marine Equipment, begin by checking the scanner power supply cable to ensure it is sound and that all connections are tight and free of corrosion. Check the relevant fuses and breakers. Ensure the power source provides the correct voltage and sufficient current, using a voltage booster if needed. Verify that the scanner is correctly connected to a Raymarine network switch or SeaTalkhs crossover coupler, as applicable, and check the status of the Raymarine network switch. Make sure SeaTalkhs/RayNet cables are free from damage and the scanner pedestal switch is in the ON position. If a software mismatch between equipment is suspected, contact Raymarine technical support.

Raymarine e95 Specifications

General

Display Size	9 inches
Display Resolution	800 x 480 pixels
Touchscreen	Yes
Chartplotter	Yes
Sonar Support	Yes
Radar Compatible	Yes
Wi-Fi	Yes
Bluetooth	Yes
Networking	NMEA 2000, Ethernet
Video Input	Yes
Waterproof Rating	IPX6
Display Type	Color LCD
Cartography	Navionics
Operating Voltage	12 V DC / 24 V DC
Weight	3.2 lbs
GPS Receiver	Built-in 50 channel

Related product manuals

Raymarine E70371

Raymarine E70482

Preview: Raymarine E70085 Dragonfly

Raymarine E70085 Dragonfly