Why won't my Raymarine Marine GPS System radar initialize?
If your Raymarine Marine GPS System radar will not initialize and the Voltage control module (VCM) is stuck in “sleep mode”, check the power connection at the VCM. Verify the voltage at the input is 12 / 24 V and the voltage at the output is 40 V.
General| Display Size | 7 inches |
|---|---|
| Display Resolution | 800 x 480 pixels |
| Chartplotter | Yes |
| Sonar Capability | Yes |
| Wi-Fi Connectivity | Yes |
| NMEA 2000 Compatible | Yes |
| Waterproof Rating | IPX6 and IPX7 |
| Ethernet | Yes |
| Cartography | Navionics, C-MAP |
| Radar Compatible | Yes |
| Display Type | LCD |
| GPS Receiver | Yes |
Crucial warnings regarding navigation, safety, and operational precautions for safe use.
Covers powering on/off, series controls, keypad, touchscreen, multi-touch, and homescreen overview.
Details initial setup, GNSS status, autopilot, engine ID, AIS, preferences, memory cards, simulator, pairing, and software updates.
Instructions for saving, restoring, and managing waypoints, routes, tracks, and system settings.
Covers taking screenshots and performing system resets for settings and data.
Covers autopilot features, enabling control, engaging, disengaging, and adjusting heading.
Details pilot setup, vessel settings, drive settings, commissioning, status symbols, and alarms.
Explains alarm severity, acknowledgment, and the Alarm Manager for configuration.
Details configuration options for safety, general, and engine alarms, including thresholds and history.
Instructions on activating, cancelling, and displaying Man Overboard (MOB) data and icons.
Explains AIS functionality, target types, status symbols, and necessary hardware for AIS usage.
Details dangerous targets, collision avoidance features, and target interception graphics.
Covers waypoint overview, display examples, context menus, placement, groups, and editing.
Explains route features, building routes from tracks, automatic route generation, and reviewing routes.
Covers overview, electronic charts, selection, GPS check, orientation, and motion modes.
Details navigate menu options, waypoints, routes, tracks, collision avoidance, and race features.
Covers sonar technologies, modules, overview, sonar check, multiple modules, setup, and maintenance.
Covers overview, features, scanner status, multiple scanners, radar check, context menu, and range/quality.
Details collision avoidance features, MARPA, vectors, guard zones, trails, and tracked targets.
Addresses problems with power not turning on, or the unit keeping turning off.
Covers Radar, GPS, Auto Route, Sonar, Thermal Camera, Video, Wi-Fi, Bluetooth, and Touchscreen issues.
Information on accessing product support, warranty, service, and repairs via website, phone, and email.
To Next Page
