Raymarine S1000 User Manual

Raymarine
S1000 Autopilot
User Guide
Welcome to the S1000 Autopilot
Handbooks can be such daunting things, can’t they?
Please don’t worry, we have made this guide as simple as
possible.
Your guide contains an explanation on how to use your
S1000, so finding your way around will become second
nature.
If all you want to do is power up and get going, that’s fine.
But if you want to know more about what your S1000 will
do for you, you’ll find it here.
Document Number: 81245-2
Date: January 2005
D7637-1

Raymarine S1000 Specifications

General

Brand	Raymarine
Model	S1000
Category	Autopilot System
Language	English

Summary

Getting Started

System Components

Details the main components of the S1000 system: Course Computer, Controller, and Hydraulic Pump.

Changing the Controller batteries

Instructions for replacing the AAA batteries in the S100 Autopilot Controller.

The S100 Autopilot Controller

Overview of the S100 Autopilot Controller buttons and their functions.

How do I power the system on?

Step-by-step guide to powering on the S1000 autopilot system and controller.

Using your S1000

How do I use the autopilot?

Introduction to the S1000's preset steering modes and activation requirements.

How do I automatically steer straight?

Instructions for activating AUTO mode to maintain a straight course.

How do I follow a route from my GPS?

Guidance on using the autopilot to follow routes from a GPS or Chartplotter.

How do I follow a circle pattern?

Instructions for engaging CIRCLE mode and adjusting pattern size.

How do I follow a zig-zag pattern?

Instructions for engaging ZIGZAG mode and adjusting pattern size.

How do I follow a cloverleaf pattern?

Instructions for engaging CLOVERLEAF mode and adjusting pattern size.

How do I dodge an obstacle?

Methods for temporary course correction and manual override while in autopilot mode.

Setting up your S1000

How do I change the pattern direction?

Change the default autopilot pattern direction to clockwise or anticlockwise.

How do I change my boat type?

Configure the system to suit your vessel type (Power, Sail, or Fishing).

Setting up the autopilot (AutoLearn)

Run the automatic configuration utility for initial setup and calibration.

How do I adjust the autopilot settings?

Fine-tune autopilot performance parameters like Gain, Response, and Trim.

What is Rudder Gain?

Understand and adjust rudder gain for optimal steering response and course correction.

What is Counter Rudder?

Learn about counter rudder and how to set it to prevent veering off course.

What is Response?

Adjust the response level for course keeping accuracy and helm activity.

What is Auto Trim?

Configure AutoTrim to correct for trim changes caused by wind loads.

Alarms and Troubleshooting

S1000 Alarm messages

Understand various alarm messages, their causes, and recommended solutions.

Fault finding

Use symptom-based tables to diagnose and resolve common system faults.

Safety alarm

Learn about the safety alarm triggers, such as loss of controller contact or GPS signal.

General maintenance

Perform routine checks and cleaning for the autopilot system.

Dealer maintenance Procedures

Access calibration, version numbers, and diagnostic procedures for authorized personnel.

Product support

Find information on contacting distributors, service representatives, and technical support.

Important Safety Information

Safety Notices

Important safety warnings regarding power switches, installation, and calibration.

Declaration of Conformity

Statements regarding compliance with essential requirements and relevant directives.

EMC Guidelines

Information on Electromagnetic Compatibility standards for marine environments.