Chapter 3: Adjusting SmartPilot Settings 43
Dealer Calibration screens and settings
T he items in Dealer Calibrat ion vary accord ing to the vessel type you have
selected. See the table on
page 52
for default val ues.
SeaTrial Calibration lock
T his screen controls wheth er it is possible to acc ess Seatrial Calibration.
V essel type
V essel type should be set when c ommissioning th e SmartPilot (see
page 21
).
Notes: (1)
When you select the v essel typ e, the Smar tPilot will set app ropriate de
faults for several other calibration settings. Refer to the table on page 52
for default values.
(2)
The vessel type options will normally give optimum performance for typical
vessels of each t ype. However, you may find yo u can im prove t he
performan ce of your vessel by selecting an option for a different v essel
type.
Options
CAL LOCK OFF
Calibrat ion lock o ff – Seatri al calibratio n can be accessed
(default)
CAL LOCK ON
Calibrat ion lock on – Seatrial calibration canno t be
accessed
Options Notes
DISPLACE
NO T APP LICABLE FO R S1 WHEEL / TILLER
PILOTS
SEMI DISPLACE
PLANING
STERN DR V
WORK BOA T
SAIL BOAT
(Typ ical setting for b oth S1 Wheel and
Tiller pilo ts).
Sailing b oat
81282_1.book Page 43 Monday, October 2, 2006 1:58 PM
To Next Page
Loading...
