Need help?Do you have a question about the Raymarine SPX 30 and is the answer not in the manual?
General| Brand | Raymarine |
|---|---|
| Model | SPX 30 |
| Category | Autopilot System |
| Language | English |
Important safety warnings and cautions related to product installation and operation.
Raymarine's adherence to EMC regulations and requirements for optimal system performance.
Overview of the two key stages: planning and installation for the SPX SmartPilot system.
Raymarine's recommendation for certified installation by approved installers for warranty benefits.
Details on customer support channels including FAQs, service info, and contact methods.
List and part numbers of available documents to aid in the installation and operation of the SPX SmartPilot.
Details the components of the SPX SmartPilot system and how they are logically linked.
Explains how data cables carry information between the autopilot and other onboard electronics.
Illustrates the SPX unit's integration into a typical SeaTalkng data system with instruments.
Shows how the SPX unit fits into a SeaTalk data system with instruments and transducers.
Explains how Raymarine and third-party equipment connect via NMEA 0183 cabling.
Information on compatible autopilot controllers and instructions for mounting them.
Describes different types of drive units and their compatibility with the SPX SmartPilot.
Guidance on selecting and connecting appropriate power and drive cables for the system.
Essential steps for correctly grounding the SPX SmartPilot unit to ensure proper function.
Overview of how to connect data cables for SeaTalk and SeaTalkng systems to the SPX SmartPilot.
Crucial advice on locating and mounting the compass to avoid interference and ensure accuracy.
Details requirements and connection procedures for the rudder reference sensor.
Instructions for installing an optional sleep switch to disable autopilot functions.
Information on fitting an optional external alarm for audible alerts.
How to integrate wind vane data for course relative to the wind.
Steps for testing the installed system, including troubleshooting common issues.
Final procedure for securing all equipment and cables after installation.
Guidance on the safety-critical commissioning process for the autopilot system.
Comprehensive technical specifications for the SPX SmartPilot computer, including electrical and environmental data.
Details NMEA 0183 sentences the SPX SmartPilot receives and the data extracted.
Details NMEA 0183 sentences the SPX SmartPilot sends and the information provided.
To Next Page
