15
Adjustment
1. To enter Set Door Profile mode, press and hold the
black button for one second. The UP and DOWN
buttons turn a solid color.
2. To set Door Profile, press the UP and DOWN buttons.
The Learn LED button blinks and beeps as you change
the setting.
3. The number of Learn LED button blinks indicates which
profile you have selected. There is no preset door
profile setting.
4. Press and release the Black button to set the Door
Profile. This process is now complete. Proceed to the
Travel Learn mode.
EXITING DOOR PROFILE NUMBER SETTING
If there is no selection within 4.5 minutes, the Door Profile
selection mode will be cancelled with a long beep.
Set Door Profile
2
To prevent possible SERIOUS INJURY or DEATH, after
ANY changes to the door profile, reprogram limits.
To Next Page
Loading...
Need help?
General
