Do you have a question about the Raypak 2100 - 4001 and is the answer not in the manual?
Covers ASME inspection, stamping, and National Board approval for heat exchangers.
Details materials for headers, fin tubing, and tube sheets.
Specifies 125 PSIG ASME pressure relief valve and temp/pressure gauge.
Describes left/right hand connections and two-pass flow.
Details the 120V, 60Hz, 1 Ph power supply and 120/24V transformer.
Covers pilot shut-off, intermittent ignition, and high limit controls.
Includes On/Off switch, Flow switch, and pump time delay.
Details manual shut-off cock, pressure regulator, and safety shut-off valve.
Describes control valve operation and available firing modes.
Specifies fuel options and ANSI Z21.10.3 certification.
Covers front controls, stainless steel burners, and baked enamel paint.
Details built-in draft diverter and optional draft inducer.
Specifies the B-17 modulating controller for models WH2.
Details single-stage and two-stage tankstat controllers.
Covers Y-241 (1-4 stages) and Y-281 (1-8 stages) sequencers.
Lists low water cut-off probe and gas pressure switches.
Mentions CSD-1 safety controls.
Covers ASME inspection, stamping, and National Board approval for heat exchangers.
Details materials for headers, fin tubing, and tube sheets.
Specifies 125 PSIG ASME pressure relief valve and temp/pressure gauge.
Describes left/right hand connections and two-pass flow.
Details the 120V, 60Hz, 1 Ph power supply and 120/24V transformer.
Covers pilot shut-off, intermittent ignition, and high limit controls.
Includes On/Off switch, Flow switch, and pump time delay.
Details manual shut-off cock, pressure regulator, and safety shut-off valve.
Describes control valve operation and available firing modes.
Specifies fuel options and ANSI Z21.10.3 certification.
Covers front controls, stainless steel burners, and baked enamel paint.
Details built-in draft diverter and optional draft inducer.
Specifies the B-17 modulating controller for models WH2.
Details single-stage and two-stage tankstat controllers.
Covers Y-241 (1-4 stages) and Y-281 (1-8 stages) sequencers.
Lists low water cut-off probe and gas pressure switches.
Mentions CSD-1 safety controls.
| Model | 2100-4001 |
|---|---|
| Gas Type | Natural Gas or Propane |
| Brand | Raypak |
| Water Connection Size | 2" NPT |
| BTU Input | 400, 000 BTU |
| Input BTU | 2100 - 4001 |
| Fuel Type | Gas |












Loading...