English
13
Maintenance
Cleaning the lens: Blow off loose particles using clean compressed air. Gently
brush remaining debris away with a camel's hair brush. Carefully wipe the surface
with a moist cotton swab. The swab may be moistened with water. NOTE: DO NOT
use solvents to clean the glass lens.
Cleaning the housing: Use soap and water on a damp sponge or soft cloth. NOTE: DO
NOT submerge the unit in water.
Reminders
■ Not recommended for use in measuring shiny or polished metal surfaces
(stainless steel, aluminum, etc.). See “Emissivity” for measuring these surfaces.
■ The unit cannot measure through transparent surfaces such as glass or plastic.
It will measure the surface temperature of these materials instead.
■ Steam, dust, smoke, or other particles can prevent accurate measurement by
obstructing the unit’s optics.
To Next Page
Loading...
Need help?
General
