To Next PageTo Next Page
Need help?Do you have a question about the RayTek Raynger MX4 and is the answer not in the manual?
General| Emissivity | Adjustable from 0.10 to 1.00 |
|---|---|
| Response Time | 500 ms |
| Display | Backlit LCD |
| Power Supply | 9V battery |
| Spectral Response | 8 to 14 µm |
| Distance to Spot Ratio | 50:1 |
| Accuracy | ±1°C or ±1% of reading, whichever is greater |
| Resolution | 0.1°C (0.1°F) |
| Laser Targeting | Single laser |
| Data Logging | Yes |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Weight | 227 g (8 oz) |
Details the user interface, including keys and display elements.
Lists and describes the functions displayed on the screen.
Provides a quick guide on how to perform a temperature measurement.
Details how emissivity value depends on material and surface characteristics.
Details how to connect thermocouple and NTC probes to the device.
Continues the instructions for connecting various types of probes to the device.
Details how to set and adjust the high temperature alarm threshold.
Guides the user on how to configure the low temperature alarm setting.
Provides instructions for setting the device's internal clock and time format.
Guides the user on how to set the device's date and date format.
Explains how to adjust the device's offset for accurate measurements.
Details how to configure the lock function, temperature units (°C/°F), and buzzer settings.
