Sensitivity pertains to how much effort is needed to move the mouse pointer in any direction. The
higher the sensitivity, the more responsive the mouse will be. (Recommended setting: 1600 – 1800)
Enable X-Y Sensitivity
By default, the X-axis (horizontal) and Y-axis (vertical) use the same sensitivity values. However, you
may set different sensitivity values to each of the axes by selecting the ENABLE X-Y SENSITIVITY
option.
Configure Sensitivity Stages
A sensitivity stage is a preset sensitivity value. You can create up to 5 different sensitivity stages which
you can cycle through using the sensitivity stage up/down buttons. You may use the ENABLE X-Y
SENSITIVITY concurrently with this option.
Acceleration
Acceleration increases the cursor’s movement speed depending on how quickly you move the mouse.
The higher the value, the faster the mouse accelerates. (Recommended settings: Windows 0, Mac 5)
Polling Rate
To Next Page
Loading...
