Enable X-Y Sensitivity
By default, the X-axis (horizontal) and Y-axis (vertical) use the same sensitivity values. However,
you may set different sensitivity values to each of the axes by selecting the ENABLEX-Y
SENSITIVITY option.
CON FIGURE SENSITIVITY STAGES
NUMBER OF STAGES 5
Stage 3Stage 1
800
too
1 800
1 800
Stage 4
9000
CANCEL
Stage 5
6000
ENABLE X-YSENSITIVITY
SAVE
Configure Sensitivity Stages
A sensitivity stage is a preset sensitivity value. You can create up to 5 different sensitivity stages
which you can cycle through using the sensitivity stage up/down buttons. You may use the
ENABLE X-Y SENSITIVITY concurrently with this option.
Acceleration
Acceleration increases the cursor's movement speed depending on how quickly you move the
mouse. The higher the value, the faster the mouse accelerates. (Recommended settings: Windows
O, Mac 5)
Polling Rate
The higher the polling rate, the more often the computer receives information about the status of
your mouse, thus increasing the mouse pointer's reaction time. You can switch between 125Hz
(8ms), 500Hz (2ms) and 1000Hz (lms) by selecting your desired polling rate on the dropdown
menu. (Recommended setting: 500Hz —1000Hz)
FOR GAMERS. BY GAMERS:
20
To Next Page
Loading...
