Razor A6 User Manual

3 Insert and secure the left and right handlebars
by pressing the spring-loaded buttons and
inserting them into the T-bar.
4 Make certain BOTH handlebars are properly
locked onto the T-bar.
3
ASSEMBLY AND SET-UP
WARNING:
Keep fi ngers clear of the pivoting
mechanism when folding or
unfolding the scooter. Make sure
others are standing clear.
WARNING: Failure to
properly engage the spring-loaded
buttons may cause the handlebars
to dislodge while riding and may
cause you to lose control and
fall. When correctly engaged the
handlebars will not rotate nor will
they move sideways. Note that
when properly engaged, the spring-
loaded buttons are clearly visible in
the holes on the T-bar.
Unfolding the Scooter for First Time Use
1
To release the folding mechanism, place the
scooter on the ground. Slide the Anti-Rattle
knob up to raise T-bar. Turn knob completely
counterclockwise and continue raising T-bar
until it is locked in the upright position.
Note: To activate the Anti-Rattle feature, turn the knob clockwise. Note there is no need to overtighten.
To fold, loosen the Anti-Rattle knob (by turning knob counterclockwise) prior to pulling up the
Anti-Rattle knob to release the folding mechanism. For instructions on folding see page 6.
2 Turn knob clockwise to tighten and engage
the Anti-Rattle mechanism.

Razor A6 Specifications

General

Type	Classic scooter
Proper use	Asphalt
Wheel size	254 mm
Wheels type	Solid wheels
Brake system	Foot brake
Product color	White
Wheels material	Polyurethane
Handlebar length	340 mm
Number of wheels	2 wheel(s)
Recommended gender	Any gender
Maximum load weight	100 kg
Recommended age (min)	8 yr(s)
Recommended age group	Universal
Adjustable steering wheel height	Yes
Number of products included	1 pc(s)

Weight and Dimensions

Depth	428 mm
Width	1000 mm
Height	1067 mm
Weight	5000 g