Need help? Call 1.800.694.0013
Do not return to place of purchase.
Replacement Parts
1.800.694.0013
5
1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.800.694.0013 toll-free. Please have
your owner’s manual and model number available for
reference.
Note: The model number can be found on the back of the griddle.
Assembly Tips:
1. Select an area where you will assemble this product. To
protect components, choose a smooth surface that’s free of
cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before
completing each step, go back and fully tighten all hardware.
Be careful not to over-tighten. That could damage surfaces or
strip threads.
4. For best results, complete each step in the order presented.
After assembly you will need:
• (1) Leak Detection Solution (instructions on how to make
solution are included in “Operating Instructions” section).
• (1) 14.1 oz or (1) 16.4 oz LP gas tank (not included).
Typical assembly is approximately 10 minutes.
3
Insert Grease Cup and Control Knob
2
Attach Legs
4
Attach Regulator
Note: Once attached, the regulator/control valve will freely rotate to accomodate the
LP gas tank.
Assembly Instructions
1 2
To Next Page
Loading...
Need help?
General
