HEADLINE
77
USAGE
How to Ride
Do not activate the thumb throttle unless you are on the Razor ICON and in a safe, outdoor environment suitable for riding.
Put kickstand up.
Press the power button (A) for three seconds, the LEDs on the battery display will light up. Press the power button
(A) for three seconds again to turn the unit off.
Headlight: To activate the headlight the product must be powered ON. Press the light button (B) once to activate
the headlight. To deactivate the headlight, press the light button once again.
Get on the scooter and place both hands on the handlebars. Kick to start (C), and then press down on the thumb
throttle (D).
How to Stop
For controlled stops, apply the brake by pressure on the rear-fender brake or electronic brake (on handlebar).
Razor recommends that you practice applying the brake options at various speeds and in an open area free from
obstructions before riding your scooter around others.
When the brake is applied the tail/brake light will glow brighter. The tail/brake light is always functional and
independent of the other lights being activated.
Option 1 - Press the electronic brake (on handlebar), the power will cut off and then product will slow to a stop.
Option 2 - Step on the rear-fender brake, the power will cut off and then product will slow to a stop.
Note: The Razor ICON electric scooter features Regenerative Braking. Regenerative braking is a means of
recovering and converting kinetic energy into stored power. Using the scooter’s electric motor, energy that is usually
lost during deceleration and braking is captured and converted back to stored power extending run time and range.
Regenerative braking only recovers a small amount of energy at a time but can be significant over the course of a full
battery cycle. As always specifications and the amount of recovered regeneration varies with rider weight, terrain,
and environmental conditions.
Note: Electric scooter must
be moving at least 3 mph
(5 km/h) while engaging
throttle to engage motor.
Speed
Mode
Indicator
Light
Battery
Capacity/
Level
Speed Speed
Unit
Indicator
D
A
C
B
Note: If the scooter is stopped,
and no button has been pressed
for
5 minutes, the scooter will
automatically shut down.
W
ARNING: The brakes are
capable of skidding the rear tire
and throwing an unsuspecting rider.
Practice in an open area free from
obstacles until you are familiar with
the brake function. Avoid skidding to
a stop as this can cause you to lose
control and/or damage the rear tire.
Note: As an additional safety
feature, the scooter is designed to
cut power to the motor when the
brakes are applied.
Note: Motor will re-engage,
(without having to kick to start), if
brakes are released and throttle is
applied before scooter has slowed
down to under 3 mph (5 km/h).
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels.
OPTION 2OPTION 1
To Next Page
Loading...
