Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
5
Pairing the Remote
1 Turn the power switch on the
remote to the OFF position.
4
If the light on the power button on
the product is SOLID, your remote
has been successfully paired.
2 Press the power button on the
product to the ON position for
about 2-3 seconds. The light on
the power button should now be
flashing quickly.
5 If the light on the power button
continues to flash quickly, turn the
power switch on the remote to the
OFF position and repeat steps 2-3
until the remote is paired.
3 Move the lever on the remote
to the STOP position and HOLD.
Do not let go of the lever. Turn the
power switch on the remote to the
ON position.
Note: Contact Customer Service
if you experience any issues with
pairing the remote.
ASSEMBLY AND SET-UP
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
5
To Next Page
Loading...
Need help?
General
