4
Assembly
Your pre-assembled Trikke requires only handlebar and footrest
attachment and a quick maintenance checklist before riding.
F
Install front wheel by removing the axle from the fork, Arrange the
hardware sequence as shown in figure 1.
Figure 1.
Position the wheel spacers so the rim is facing the wheel bearing as
shown in Figure 2. Using the two 5mm Allen key wrenches, tighten the
axle securely as shown in Figure 3.
Figure 2. Figure 3.
Note that the fork offers three axle positions. For the time being,
position the axle as shown. Later, when you become more experienced,
you can try the alternative axle positions for climbing, speed, and agility
variations.
Install the left and right footrests as shown in Figures 4 and 5. Tighten
the retaining clamp securely as shown in Figure 6.
To Next Page
Loading...
Need help?
General
