6
To install the handlebars, align the spring-loaded locking pins with the
holes on the horizontal crossbar. Depress the locking pins and insert the
handles into the tubes until the locking pins snap into the holes as
shown in Figure 7.
Figure 7.
Make sure that the brake levers are facing forward like a bike, and that
the front wheel is trailing behind the fork.
Extend the T-tube to a comfortable height by opening the quick release
lever as shown in Figure 8. To secure the adjustment, close the lever
firmly as shown in Figure 9.
Figure 8. Figure 9.
Maintenance
As with any machine, always check your brakes and the tightness of all
of the bolts before riding —- especially the handlebar stem bolts, wheel
axles, folding joint bolts, and the cambering axle and bushings. Also be
aware that —- unlike a bicycle —- the Trikke’s front wheel is actually
To Next Page
Loading...
Need help?
General
