Razor UB1 User Manual

Bolt
Spacer
Spacer
Bolt
1 Using two (2) 5 mm Allen wrenches, loosen the axle bolt. Remove wheel and install replacement wheel.
(Note the sequence of the hardware)
Front Tire Replacement
Tools Required: Two (2) 5 mm Allen Wrenches
Battery Replacement
Tool Required: Phillips Screwdriver
1 Using a Phillips screwdriver remove the seven (7)
screws and remove the battery cover.
2 Using a Phillips screwdriver remove the four (4)
screws from the battery bracket, locate and disconnect
the battery from the controller, remove the battery and
replace with new battery. Reconnect the controller and
replace the four (4) screws.
3 Set battery cover back in place and secure with the
seven (7) screws.
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
10
REPAIR & MAINTENANCE
A (4 PCS)
A (4 PCS)
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B (3 PCS)
B (3 PCS)

Razor UB1 Specifications

General

Brand	Razor
Model	UB1
Category	Scooter
Language	English