SCREEN DESCRIPTIONS HeatNet Control V3
Page 94
On the Home screen, information on each boiler can be
accessed by pressing a boiler’s button.
Pressing The Master boiler’s button will bring up the
Master’s information screen. Information about the boiler is
displayed. Next to it is the Log File button. Pressing this
button will allow viewing of the log file. See Log Entry
section.
In the Bottom Left corner there is the Settings button which
will allow changes to the operational settings of the boiler.
See the Settings section.
Pressing any of the Member buttons will bring up a
Member’s informational screen. Limited information is
available for a Member from the Master boiler, including
making Settings changes and the Log. These need to be
viewed on each Member boiler directly.
To Next Page
Loading...
Need help?
General