EasyManua.ls Logo

RBI FlexCore CK 2500 User Manual

RBI FlexCore CK 2500
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
'$37$*0.
82-0403
Gas'JSFE %JSFDU 7FOU
4UBJOMFTT 4UFFM #PJMFST
$,4FSJFTo$,$,
$POUSPM Manual
$POUSPM"EKVTUNFOUBOE
0QFSBUJPO Instructions
5IJTJOTUSVDUJPONBOVBMBQQMJFTPOMZUP
3#*GJSNXBSFWFSTJPOY POWFSTJPOY
DPOUSPMCPBSET
Also read and follow:
'MFY$PSF$,4FSJFT(BT#PJMFS
*OTUBMMBUJPOBOE0QFSBUJOH
*OTUSVDUJPO.BOVBM
)
is manual is intended only for use by a qualied heating installer/technician. Read and follow this manual, all supplements
and related instructional information provided with the boiler. Install, start and service the boiler only in the sequence and
methods given in these instructions. Failure to do so can result in severe personal injury, death or substantial property damage.
Do not use the boiler during construction. Construction dust and particulate, particularly drywall dust, will cause contamination
of the burner, resulting in possible severe personal injury, death or substantial property damage. e boiler can only be operated with
a dust-free air supply. Follow the instruction manual procedures to duct air to the boiler air intake. If the boiler has been contaminated
by operation with contaminated air, follow the instruction manual guidelines to clean, repair or replace the boiler if necessary.
A x these instructions near to the boiler. Instruct the building owner to retain the instructions for future use by a qualied
service technician, and to follow all guidelines in the User’s Information Manual.
Copyright 201 Mestek, Inc.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the RBI FlexCore CK 2500 and is the answer not in the manual?

RBI FlexCore CK 2500 Specifications

General IconGeneral
BrandRBI
ModelFlexCore CK 2500
CategoryBoiler
LanguageEnglish

Summary

Introduction

Features & Specifications

Specifications

SETUP & OPERATION

Basic Multi Boiler System Operation

Explains the fundamental operation of multi-boiler systems with HeatNet.

Heating Control Methods

Details the five primary methods for controlling heating operations.

Domestic Hot Water Methods

Outlines the six supported methods for domestic hot water control.

Input Priorities

CALIBRATION

Calibration

Explains the process for calibrating the control system.

LOG ENTRY

DEFAULT SETTINGS & MENU ITEM DESCRIPTIONS

CONTROL SETTINGS MENU— PAGE 1

Configuration settings for HeatNet Boilers and Setpoints.

CONTROL SETTINGS MENU— PAGE 2

Configuration settings for Distributed Control and Modular Boilers.

MODBUS COMMUNICATIONS

MODBUS Input/Output Variables (Read/Write)

Table of Modbus variables for controlling the system.

MODBUS Input Variables (Read Only)

Table of Modbus variables for reading system status and data.

WORKSHEET

Related product manuals