• Overheat protection: Output power will reduce to half power when temperature
reaches 100º C (212º F) and return to full power when temperature is under 100º
C
• Safety Protection: ESC will not power motor unless the throttle stick is in the
minimum throttle position
• ESC can be programmed via the transmitter on startup or using a programming
card (Sold separately)
• ESC beeps motor during startup to confirm number of battery cells for power
input.
• RC Electric Parts has intellectual property on the product and can be updated
and upgraded. The product can also be made to customers’ specifications.
*Size and weight are for reference only and may slightly vary
BEC: Means there is a regulator that steps down the input battery voltage to power the receiver and
everything that plugs into the receiver. SBEC & UBEC are a type of BEC.
UBEC: Switching power regulator, very efficient, and produces minimal heat.
SBEC: Linear power regulator, most common in ESCs, not as efficient, and produces a lot of heat
OPTO: No BEC is provided and a separate BEC is required to power the receiver
02 Product Specifications
To Next Page
Loading...
Need help?
General
