RC 30A ES - User Manual

User Manual
RC Electric Parts’ Electric Speed Controller (ESC) for
Brushless Motors
Thank you for using RC Electric Parts’ ESC designed to meet your hobbies needs. As
you'll find the ESC's settings are programmable with lots of features. If you have any
issues with your product feel free to contact us at RCElectricParts@gmail.com and we’d
be happy to help you!
• The ESC uses a powerful high-performance microcontroller processer which
supports programmable settings to meet the user’s needs.
• Supports high RPM motors
• Maintains a desired constant RPM
• Designed to reduce interference
• Starting speed can be set
• Throttle response is very quick, stable, and linear.
• Designed for fixed wing airplanes and helicopters.
• Low-voltage values can be set.
• Integrated SBEC provides high current efficiently with little heat loss
• Abnormal input voltage protection, low voltage protection, and cut’s power when
lost signal
01 Main Features

RC 30A ES Specifications

General

Continuous Current	30A
LiPo Cells	2-4S
PWM Frequency	8KHz
Burst Current	40A
BEC	5V/2A Linear
Input Voltage	16.8V

Summary

01 Main Features

02 Product Specifications

03 Wiring Diagram

04 First Time Use

1. Throttle Range Calibration

Procedure to set min/max throttle for stable response.

2. Normal start-up

Steps for standard ESC power-up sequence.

05 Programming Instructions

06 Programmable Settings

1. Throttle Range Calibration

Recalibrate throttle range for proper ESC operation.

2. Brake: On; Off

Control propeller stopping behavior when throttle is neutral.

3. Battery type LiPo; Li-ion or NiMH; NiCad

Select battery chemistry for correct voltage protection.

4. Battery protection: Low (2.8 V or 50%); Medium (3.0 V or 65%); High (3.2 V or 75%)

Set low voltage cutoff thresholds to protect battery.

5. Recover to factory default setting.

5. Timing: Automatic; Low; High

6. Start-up: Very Smooth; Smooth; Accelerated Startup

7. Helicopter Modes: Off; Mode 1; Mode 2

8. Motor Rotation Direction: Clockwise; Counterclockwise

9. PWM Frequency: 8 kHz; 16 kHz

10. Protection Mode for Low Voltage: Reduce Power; Hard Cutoff

07 ESC Protections

Low Voltage Protection

08 Attention