RCA 25260 - Ring Volume; Key Tone; Voice Mail; Voice VM

21
Ring VOL.
Prev or Next
Voice Mail (only applicable for Main/Wired unit).
This feature is used to conveniently access the voicemail feature offered by your telephone service provider.
NOTE: You must subscribe to telephone service provider-offered voicemail on at least one
phone line in order for this feature to operate.
1. Make sure your phone is in idle mode. (not in Talk mode)
2. Press the MENU Soft key (left) to go to the main menu.
3. Press VOL (- or +) button to scroll to Voice Mail.
4. Press SELECT Soft key (right) to confirm and you may program the following items:
Voice VM and Settings
Voice VM
From the Voice Mail Menu:
1. Press VOL (- or +) button to scroll to Voice VM.
2. Press SELECT Soft key.
3. Use the VOL (- or +) button to toggle between Line 1 and Line 2 and press
SELECT soft key to select.
4. The phone will dial your voicemail access number. You may proceed
Settings
From the Voice Mail Menu:
1. Press VOL (- or +) button to scroll to Settings.
2. Press SELECT soft key.
3. Use the VOL (- or +) button to toggle between Line 1 and Line 2 and press SELECT soft key to select.
4. Use the dial pad to enter the call-in access number for your voicemail. Press DELETE button to
backspace and delete numbers, if necessary.
5. Press SAVE soft key to save and the screen displays Saved.
instructions.
BACK SELECT
RING VOL L1<>L2
L1: VOL 3
L2: VOL 3
BACK SELECT
to access your voicemail per your
MAIN MENU
VOICE MAIL
RESTORE SETTING
o +
BACK SELECT
BACK SELECT
SETTINGS
LINE1
LINE2
BACK SAVE
ENTER NUMBER:
123-456-7890
...
NOTE: Voice mail is accessable from both the MAIN/WIRED phone and any EXTENSION/WIRELESS
phones, however, the initial set up of voicemail must be done on the MAIN/WIRED phone.