To Next Page

To Previous Page

Storing a Name and Number in Memory

1. Press the Conf/Store button on the handset, ENTER NUMBER is displayed.

2. Use the keypad to enter the phone number (up to 32 digits).

3. Press the Select/Save button. The display shows ENTER NAME.

4. Use the touch-tone pad to enter a name (up to 21 characters). More than one letter is

stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice

for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the

letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a

space between the ﬁrst and last name. Press the 7 key 4 times for the letter S; press the 6

key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the

letter T; press the 4 key twice for the letter H.

5. Press the Conf/Store button again to save your selection.

Storing a Redial Number

1. Make sure the phone is OFF (not in TALK mode).

2. Press the Redial/Format button on the handset to review the redial number.

3. Press Select/Save and ENTER NUMBER is displayed.

4. Then press Select/Save again and ENTER NAME is displayed.

5. Use the keypad to enter the names.

6. Press Conf/Store button and ENTER LOCATION is displayed.

Inserting a Pause in the Dialing Sequence

Press the #Pause button on the touch-tone pad twice to insert a delay in the dialing

sequence of a stored telephone number when a pause is needed to wait for a dial tone

(for example, after you dial 9 for an outside line, or wait for a computer access tone.) Each

pause counts as 1 digit in the dialing sequence. The letter “P” in the displayed number

indicates a pause.

Reviewing, Changing or Deleting Stored Names/Numbers

To Review: Press DIR/3on the handset, then press the VOL ( + or -) button to scroll

through the stored numbers.

To Change: While viewing the record, press the Select/Save button. Follow the steps under

Storing a Name and Number in Memory.

To Delete: Press DIR/3on the handset, then press the VOL ( + or -) button to scroll to a

desired memory.

1. Press the Delete/Mute button. DELETE? is displayed.

2. Press Delete/Mute again to conﬁrm.

Memory

RCA 25424 User Manual

Other manuals for RCA 25424