14
Making a Call
1. Press the Talk or Speaker button to access an available line automatically,
OR
If you want to select a desired line, press Line button plus a number button (1-4) to
select the desired line.
2. Wait for a dial tone then dial the desired number.
3. When finished, press the Talk or Speaker button or replace the handset in the charge
cradle, to hang up.
NOTE: If the line you selected is occupied by other users, the message “LINE IN USE” will be
shown. You can press the Select/Save button to confirm selection of this line. If you want to
select another line, press the Line button plus the number button again.
Redial
To quickly redial the last number you entered (up to 32 digits):
1. Press the Talk or Speaker button.
2. Press the Format/Redial button.
Volume Adjust
Adjust the receiver volume by pressing the VOL ( + or -) button when you are in talk mode.
There are four volume levels, and each press of the VOL ( + or -) button adjusts the receiver
volume by one level.
Hold
1. Press the Hold button to put a call on hold.
2. To take a call off hold, press the Hold button again.
3. To switch a call on hold from the base to the cordless handset, press the Hold button on
the cordless handset.
Transfer
You can transfer the call to another extension.
1. Press the Int/Transfer button when it is in TALK mode.
2. Key in the extension ID number you want to transfer to.
3. The desired extension will ring, and your handset will go back to standby mode.
Privacy
When you are using the phone, if you want to secure the line, press the Privacy button.
Then, the line you are using cannot be picked up by another extension in the system.
Basic Operation
To Next Page
Loading...
Need help?
General
