23
Display Messages
The following indicators show the status of a message or of the unit.
REGISTRATION: Prompt telling you to enter registration mode of handset.
ENTER NUMBER: Prompt telling you to enter number.
ENTER NAME: Prompt telling you to enter the name.
ENTER LOCATION: Prompt telling you to assign the memory location(from 01 to 40).
LINE ON HOLD: Prompt telling you that the line you selected is currently on hold.
LINE IN USE: Prompt telling you that the line you selected is currently use by
another extension.
SEARCHING..: Prompt message telling you that handset registration is in process.
INCOMPLETE DATA: Caller information has been interrupted during transmission or the
phone line is excessively noisy.
BASE IN USE: The Base unit is in use, so handset is blocked
for use.
SELECT PHONE ID: Prompt asking user to key in the ID of another extension.
DELETE ALL: Prompt asking if you want to erase all Caller ID records.
NEW CALL: Indicates call has not been reviewed.
NO NUMBER: Indicates no Caller Number was received.
NO NAME: Indicates no Caller Name was received.
NO DATA: Indicates no Caller ID information was received.
BLOCKED CALL: Caller information that has been blocked from transmission.
BLOCKED NAME: Name has been blocked from transmission.
BLOCKED NUMBER: Number has been blocked from transmission.
UNKNOWN CALLER: The incoming call is from an area not serviced by Caller ID or the
information was not sent.
UNKNOWN NAME: The incoming call is from an area where name was not sent.
UNKNOWN NUMBER: The incoming call is from an area where number was not sent.
Other Information
To Next Page
Loading...
Need help?
General
