22
Headset and Belt Clip Operation
Connecting an Optional Headset to the Handset
For hands free conversation, connect the headset (optional) to the HEADSET jack as shown.
The handset receiver and microphone are disabled when the headset is connected.
Adjust the headset to rest comfortably on top of your head and over your ear. Move the
microphone to approximately 2 to 3 inches from your mouth.
Other Information
Headset
Plug
Headset
Jack
Connecting the Belt Clip
There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the ends of
the belt clip into place.
To Next Page
Loading...
Need help?
General
