37
Deleting a CID Record
To delete the record shown in the display, press the DELETE
button once.
Deleting All Call Records
This feature allows you to clear all CID records at once.
1. While viewing a CID record, press and hold the DELETE button. PRESS DELETE AGAIN
CLEAR ALL CALLER ID shows in the display.
2. Press the DELETE button again to confirm.
Dialing Back
When reviewing CID records, you can dial back the numbers showing on the display by
pressing the DIAL button.
If You Programmed Your Local Area Code
1. Press the CID button , and then use the VOL (+ or -) buttons to display the number you
want to dial.
2. If you see a number with 7 digits (i.e.555-1234), then the call was received from within
your area code. However, this does not guarantee the call is a local call. If you see a
number with 11 digits (i.e.1-234-555-1234), then the call received was not from your
area code.
3. To adjust the phone number format, use the REDIAL/FORMAT button. For instance, a 7-
digit local number sometimes cannot be dialed because it requires a 10-digit or 11-digit
format. Use the REDIAL/FORMAT button to scroll through 7, 10 and 11-digit numbers.
7-digits: 7-digit telephone number (i.e.555-5555)
10-digits: 3-digit area code +7-digit telephone number (i.e.425-555-5555)
11-digits: long distance code 1 +3-digit area code +7-digit telephone
number (i.e. 1-425-555-5555)
4. To dial the displayed number, select a line or press DIAL again.
If You Did Not Program Your Local Area Code
1. Press the CID button , and then use the VOL (+ or -) buttons to display the number you
want to dial. You will only see 10-digit numbers (i.e. 234-555-1234).
2. Press DIAL to dial back. You may adjust the number format by pressing the REDIAL/
FORMAT button before dialing.
Caller ID
To Next Page
Loading...
