How to fix RCA Home Theater System remote control that isn't working?
If the remote control isn't working properly, make sure it's pointed at the remote sensor of the unit and is within about 23 ft (7 m). Remove any obstacles between the remote and the DVD player. If it still doesn't work, replace the batteries with new ones.
Why is there no sound from the center speaker of my RCA Home Theater System?
If there is no sound from the center speaker, set the Surround Mode to DTS, DOLBY DIGITAL, DOLBY PRO LOGIC or STEREO.
Why is there no sound from the rear speakers of my RCA Home Theater System?
If there is no sound from the rear speakers, set the Surround Mode to the desired surround mode position. Ensure that the source being played is recorded or broadcast in surround sound or stereo. Check all rear speaker wires for a good connection.
How to improve poor playback picture on RCA 3-DVD Changer?
If the playback picture is poor, clean the disc.
What to do if my RCA 3-DVD Changer receiver does not respond when the buttons are pressed?
If the receiver does not respond when the buttons are pressed, disconnect the power plug from the outlet, and insert it again. This may help if static electricity caused by dry air is the cause.
What to do if my RCA 3-DVD Changer Home Theater System has no power?
If there is no power, plug the power cord into the wall outlet securely.
Why won't my RCA Home Theater System DVD player start playback?
If the DVD player doesn't start playback, make sure a playable disc is inserted correctly with the playback side down and placed within the guide. Check the disc type, color system, and regional code. Clean the disc if it's dirty. If a menu is on the TV screen, press SETUP to turn it off. Also, check if the rating level is set and cancel the rating function or change the rating level if needed.
How to troubleshoot no sound on RCA 3-DVD Changer?
If no sound is output when a function is selected, ensure the component is connected correctly. If the sound is muted, press the remote’s MUTE button. Also, check that the volume isn't turned down and adjust it accordingly.
What to do if there is no picture on my RCA 3-DVD Changer Home Theater System?
If there is no picture, ensure that the TV is set to receive the DVD signal output, select the appropriate video input mode on the TV. Also, check that the video cable is securely connected into the jacks. Finally, verify that the connected TV is turned on.
General| Number of Discs | 3 |
|---|---|
| Progressive Scan | Yes |
| Remote Control | Yes |
| Playable Media | DVD, CD |
| Disc Capacity | 3-disc changer |
| Video Output | Component |
| Audio Output | Digital Audio (Coaxial) |
Guidance on safely connecting cables to the receiver and associated equipment.
Guide to connecting various audio and audio/visual components to the receiver.
Step-by-step guide for connecting front, rear, center, and subwoofer speakers to the receiver.
Recommendations for optimal speaker placement to achieve the best surround sound experience.
Step-by-step guide to loading, selecting, and playing DVD discs.
A table of common symptoms, their causes, and suggested remedies for receiver and DVD player issues.
To Next Page
