6.3 Upgrade Color Balance Table and Backlight configuration file
1 .When you finish to upgrade the basic software, it will display the software date in the factory main menu.
the software date
2. Download the color balance table file (CompQuality.bin) and backlight configuration files (ComScaling.bin) to the USB
disk. The way of upgrading the color balance table is the same as upgrading the basic software, refer to 6.1/6.2.
NOTE:
o The order of upgrading TV software: Firstly, basic main board software; Secondly, backlight configuration files and
color table.
o Make sure that there are two files in the USB disk (ComScaling.bin and CompQuality.bin), insert the USB disk
to the TV, and then press POWER button to turn on theTV, it will spend lOsto finish upgrading the software.
o When finish to upgrade the backlight configuration file, the TV will upgrade the color table automatically.
o Pull out the USB disk after finishing upgrading software.
o DO NOT power off or unplug theTV while upgrading, otherwise the upgrading will fail, and the main board will be
unable to upgrade normally any more.
3. After finish to upgrade the software, the software date will change:
Color Table
In "VERSION INFO", it displays the panel model and Backlight Adjust.
Version 1.0
23
To Next Page
Loading...
