CAMERA/PLAY
Switch in
CAMERA
Select the date, time, and/or age display you want to record on
your tape.
The clock cell must be installed and the
date, time, and ages set before they can
be selected and recorded.
1. Place the CAMERALPLA Y switch in
CAMERA.
2. Attach a power supply, and slide the
POWER switch to turn on the
camcorder. The POWER indicator
will light.
3. Press the DATl2TlME ADJ. MODE
button to select one of the displays.
Note: Press the
AGE
button to select the
fast age, second age, or no age.
l
Date and Age Display: The date
and age will be displayed and
recorded.
l
Auto Date: The date will be
automatically recorded.
l
Auto Date Titler Display: The date
is automatically recorded across the
center approximately four times
larger than the normal displays.
l
Age Display: Only the age will be
displayed and recorded. Press the
AGE button to record the other age.
l
Time and Age Display: The time
and age will be displayed and
recorded.
l
Date and Time: The date and time
will be displayed and recorded.
l
TV On-Screen Display: The
viewfinder displays will appear on
the screen of a TV connected to the
camcorder during the record-pause
mode.
32
To Next Page
Loading...
Need help?
General
