RCA CC180 User Manual

Electronic Viewfinder
or only the date can be recorded on your tape.
Whenever one f the displays appears in the viewfinder, it will
tape. You can choose to record only the date,
both the date a d time, or neither.
has’an AUTO DATE feature that will
isplay and record the date on the tape.
as described on page 2.
the camcorder. Slide the POWER
power. The POWER
MODE control panel is
SET CLOCK will appear in the
the display fou are setting.
I
SELECT Button
MODE Button
V/l
-DISPLAY Button
,GE Button
5
Press one of the DATlQTIME SET buttons repeatedly until the
correct month appears.
6. Press the SELECT button. The flashing cursor will move to
the next part of the display.
7. Repeat steps 5 and 6 until you have entered the correct
month, day, year, hour including AM or PM, and minutes.
8. Press the SELECT button again to remove the flashing cursor
from the display and start the camcorder’s internal clock.
The clock will not start until you remove the flashing cursor
from the viewfinder.
Correcting Date or Time
To correct the date or time, press the MODE button to display
the time and date in the viewfinder. Then press the SELECT
button until the incorrect digit is flashing. Press one of the
DATE/TtME SET buttons to enter the correct digit. Press the
SELECT button until the flashing cursor is removed from the
display. The internal clock will not start until you remove the
flashing cursor from the viewfinder.
Vjewfinder Display
12

RCA CC180 Specifications

General

Brand	RCA
Model	CC180
Category	Camcorder
Language	English