electronic viewfinder (EVF) is a miniature
monitor that displays the picture seen by the
camcorder
wHe
recording. The viewfinder can also be used
playback.
-Eyepiece
Electronic
(EVF) in
t
Position
counterclockwi
lets you set the focus of the
vision. If you wear eyeglasses,
camcorder without them.
It is easiest to se the focus by focusing on one of the
us control does not affect the focus of the
BRIGHT Control
viewfinder can be tilted up and
CaimUp Feature
CAMERA/PLAY MODE
Control Panel in
CAMERA Position
POWER Button
and Indicator
/GAIN
UP Button
FULL
AUTO
Button
The gain-up feature allows more light to enter the camcorder.
Some examples when you may want to add more light are:
l
When the subject is darker than the surrounding scene.
l
When the background is bright, but your subject appears too
dark. For example, a person standing in front of a window.
l
When the subject you are recording is in a shadowed area.
Note:
Recordings made using the gain-up feature may appear grainy.
To
use the gain-up feature:
1. Slide the POWER switch to turn on the camcorder. The
POWER indicator will light.
2. Make sure the CAMERA/PLAY MODE control panel is in the
CAMERA
position.
3. Press the
GAIN
UP button. The GAIN UP indicator will
appear in the electronic viewfinder.
Note:
Pressing the
GAIN UP
button turns
off
the
FULL AUTO
feature.
GAIN UP
I----
Display in Viewflnder
4. Press the GAIN UP button to turn off the gain-up feature
when lighting conditions return to normal.
Note:
Pressing the
FULL. AUTO
button also turns off the gain-up
feature.
To Next Page
Loading...
Need help?
General
