The shoulder str p packed with your camcorder is designed to
from your shoulder, and-when you
camcorder to shooting position in
1. If the strap
keeper
is over a double section of the strap, slide
the strap kee
A
r
off the end of the strap. Replace the keeper
on the strap between the buckle and the end of the strap as
shown above!
2. Loop the end
iof
the
strap over the top of the shoulder strap
attachment
r&g.
Then)
thread the end of the strap back
eper and buckle. Make sure the strap is not
the strap to the other shoulder
4. Adjust the shoulder strap to the desired length. Then slide
both keepers up snugly against the shoulder strap attachment
rings to prevent the strap from slipping.
Carrying or Storage
Caution: When carrying the camcorder with the shoulder
strap, put the electronic
viewfmder
in the carrying position.
This helps prevent possible damage to the viewfinder from
bumping
against your body as you move.
22
To Next Page
Loading...
Need help?
General
