Removing and Replacing the Front Case of the Light
Light Bulb
Front Case
Reflection Plate
Lower Hook
To Remove and Replace Light Case
1. To remove front case, press and hold
the lower hook while removing it.
2. To replace the front case, pass the
bulb through the hole of the reflection
plate, and attach the lower hook to the
light.
3. Press front of case to light.
Notes: Do not touch the bulb with your
fingers. It may shorten its service life.
Make sure the front case of the light is
properly attached after removing it or
replacing a bulb.
When replacing the bulb, only use #221111 to
reduce the risk of fire and other hazards.
See the installation instructions packed with
the replacement bulb when replacing the bulb.
Caution: Use only bulb#221111 when
replacing the bulb to reduce the risk of
fire or other hazards.
55
To Next Page
Loading...
Need help?
General
