Removing the Lens Hood
The lens hood can be removed so you can attach optional accessories, such as wide-
angle lens, lens extender, or lens filter kit. Do not grasp the end of the lens hood.
Attach the lens cap over the lens hood, then turn them counterclockwise to
remove them.
Attaching Accessory Lens
Remove the lens hood as shown above.
Turn the accessory lens clockwise into the camcorder's lens. Make sure the lens is
tightened firmly, but do not over tighten.
All specifications and descriptions of accessories are subject to change without notice.
61
To Next Page
Loading...
Need help?
General
