36
Recording
ZOOM
START/STOP
SELF
INT.
TIME
TIME LAPSE
REC
TIME
ANIM.
PAUSE
FF
A.DUB
INSERT
REW
STOP
PLAY
START/STOP
Button
TIME LAPSE SELF
INT./TIME Button
Self Timer – Remote Only
The self-timer feature delays recording
to let the operator join the picture.
To Use the Self Timer
1. Place POWER switch in CAMERA.
2. Press TIME LAPSE SELF INT./TIME
on the remote to select 15 seconds, 30
seconds, 1 minute, or 5 minutes.
15S, 30S, 1MIN, or
5MIN appears in the viewfinder.
1MIN
3. Press START/STOP on the remote
(thumb trigger on camcorder).
Recording will be delayed the amount
of time you selected. The tally light
flashes with the flash speed increasing
five seconds before recording begins.
REC appears in viewfinder and tally
light lights when recording begins.
To Turn Self Timer Off
Press TIME LAPSE SELF INT./TIME to
remove the self-timer display from the
viewfinder.
If the tally light is flashing, press
START/STOP and then press TIME
LAPSE SELF INT./TIME.
To Next Page
Loading...
Need help?
General
