i • ¸i,
Attaching the Shoulder Strap
The camcorder's shoulder strap is designed to let you carrythe camcorder from
your shoulder and- when you are ready to shoot - bring the camcorder to shooting
position in one quick movement.
To Attach the Shoulder Strap
1. If the strap keeper 4.
is over a double _/
section of the
strap, slide the
strap keeper oft the
end of the strap. /-
Replace the keeper //_
on the strap
between the buckle
and the end of the Keeper
strap as shown.
Attach the other end of the strap to the
other shoulder strap attachment ring.
.
Loop the end of the strap over the top
of the shoulder strap attachment ring.
Buckle Keeper
5. Adjust the shoulder strap to the
desired length.
6. Slide both keepers up snugly against
the shoulder strap attachment rings to
prevent the strap from slipping.
Rings
Cautions: When carrying the
camcorder with the shoulder strap, you
may find it convenient to rotate the
viewfinder down and slide it to the
.
Thread the end of the strap back
through the keeper and buckle making
sure it is threaded under the outer
strap. Make sure the strap is not
twisted.
against your body as you move.
Make sure the shoulder Strap is fi_ly
attached before using it to c_ th_ _
camcoraer, • _ : • .,.::_
55
To Next Page
Loading...
Need help?
General
