RCA CC800 - Page 35

Cassette Warning,
and TAPE END
I
0
8 INDEX--INDEX
0
=PAUSE=
9 FADE--
FADE
Memory Stop
DEC
25 1994
0 10 hite -- MWB
Balance
DEC 25.94
AM IO:35
CAMERA and the safety tab has
been removed from the cassette.
l The l&J indicator also flashes
when the POWER switch is set to
CAMERA and there is no cassette
in the camcorder.
l TAPE END appears when the end
of the tape is reached during
recording or a cassette is inserted
with its tape already at the end.
0
8 INDEX
l INDEX appears briefly when the
camcorder is automatically making
an index mark during recording.
l Details are on page 24.
0
9 FADE
l FADE appears when you press
FADE and hashes when the
camcorder is fading in or out.
l The POWER switch must be set to
CAMERA.
l Details are on page 36.
0
10 White Balance
l The indicator for the manual white
balance selected with the A4W.B
(manual white’ balance) button
appears here.
l No indicator appears for automatic
white balance.
l The POWER switch must be in
CAMERA.
l Details are on page 37.
0
11 Tape Speed (SP or EP)
l The tape speed selected with the
SPIEP switch appears here.
l Details are on page 22.
@ Elapsed Time-Counter with
Memory Stop
l The time counter appears during
recording and playback. It is not
recorded on the tape.
l An “M” appears in front of the time
counter when memory stop is on.
l Details are on page 38.
0
13 Date and Time Indicators
l These indicators are recorded
whenever they appear. Details are
on pages 30-31.
27