The camcorder uses a smaller size cassette, but records in standard
VI-IS
format. The
cassette adapter allows you to play your VI-IS-C cassettes in a VCR just like other
standard VHS cassettes.
Insert the VHS-C cassette into the cassette adapter. Insert the cassette adapter into the
VI-IS
VCR like a normal
VI-IS
cassette.
Install Cassette Adapter’s Battery
Battery
1. Remove battery compartment cover.
2. Install supplied “AA” battery so
positive (+)
and
negative (-) ends
align properly with
(+)
and (-)
terminals in battery compartment.
3. Replace battery compartment cover.
Notes: Replace the battery when the load
time becomes much longer than normal.
Remove the battery from the cassette adapter
if it will not be used for a month or more.
This will prevent possible damage from
battery leakage. If leakage occurs, wipe up
the liquid inside the compartment and-replace
the battery with a new one.
Insert Cassette into Cassette Adapter
--.--____P
A
Cassette
Tape Wheel
1
1. Before inserting the cassette into the
3. Insert the cassette
with
the tape
adapter, remove any slack in the tape
window on the left and facing up.
by turning the tape wheel on the side
of the cassette.
Allow the cassette to drop into the
adapter. Do
not force the cassette.
2. Slide EJECT to the right to open the
cassette compartment lid.
I
n
,/-
IUECT
Switch
(continued on next page)
40