-_^
The approximate time remaining on the tape in the camcorder is automatically
displayed in the viewfinder. The
TC-2O/TC-30
switch must be set to the correct
position before the camcorder can correctly calculate time remaining.
Tape Time
P0~~~swit~b
Set the
TC-2OlTC30
Switch
Before recording, set the
TC-2O/TC-30
switch for the size of tape you are using.
l
Select
TC-20
when using a tape with
20-minutes or less recording
t@e
when using SP recording speed.
l
Select
TC-30
when using a tape with
more than 20-minutes recording time
using SP recording speed.
Note: The
time-remaining display does not
work for TC-40 tapes.
Remainin
Indicators
TAPE END
90MIN
-9OMIN
I
Viewfinder
vi!
1
:
89:IN
i
I
I
SPYIN
1
2MIN
(Flashing)
1
IHIN
(Flashing)
1
OMIN
(Flashing)
The time-remaining indicator will start
flashing when the remaining tape time
reaches two minutes.
TAPE END
appears when the tape
reaches its end during recording or a
cassette is loaded whose tape is already
at its end.
39
To Next Page
Loading...
