-
,._.....
,^,
,
Playback
Opetition
and How to Copy
apes
on the VCR
1. A. Camcorder connected directly to
TV: Turn on the TV and tune it to
the video in
p
ut channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line” or
“camera mode”. (If your VCR does
not have a “line” or “camera
mode”, consult the VCR owner’s
manual.)
OPerate
the TV as you
normally
do!
to see the signal
coming from the VCR.
2. Place the
PO$ER
switch in VCR to
turn on the camcorder. The POWER
indicator will light.
3. Press PLAY.
l
If noise bars appear on the screen,
press
TRACKfhG
-or +.
l
During playback, use the playback
features on page 45.
4. To copy what the camcorder is playing,
5.
Press STOP when you are finished.
place a blank cassette in the VCR, and
press the VCR’s RECORD button.
Note: Press
EDIT
to start camcorder
playback when copying tapes to improve
picture reproduction. Make sure the
memory-stop feature is turned off (press
COUNTER MEMORY)
or the camcorder
will enter play pause when the counter
reaches M
0:OO:OO.
Viewing What fhe Camcorder is Seeing (or Recording)
$awMsw~~*~w~
*-av,**b:,sxwa
,,.:.I.,:
.__
::i
~-1:
:
.‘:I
::j.-
.-‘..,.”
::,:
1. A. Camcorder connected directly to
TV: Turn on the TV, and tune it to
2.
the video in
P
ut channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the “line” or
“camera mode”. (If your VCR does
3’
not have a “line” or “camera
mode”, consult the VCR owner’s
manual.) Operate the TV as you
normally do to see the signal
coming from the VCR.
Place the POWER switch
in CAMERA.
Note: When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.
Press the thumb trigger to begin
recording. You can watch what the
camcorder is seeing (or recording) on
the TV screen.
Note: During record pause, you can see the camcorder’s displays on the TV screen. Repeatedly
press
DISPLAY. Details are on pages 30-31.
47
To Next Page
Loading...
Need help?
General
