Chapter 1 11
Connections and Setup
Note: If Auto Clock Set receives the
wrong time or date information, you
may need to set the clock manually.
MONTH : MARCH
DAY : 30 WED
YEAR : 2005
TIME : 12 : 00 AM
SELECT
TO EXIT PRESS
ADJUST
AUTO CLOCK SET : ON
DAYLIGHT SAVING: AUTO
TIME ZONE: AUTO
Time and Date
The VCR gives you two ways to set the time and date: the
Auto Clock Set feature or manually.
Auto Clock Set
Auto Clock Set searches for day/time information
automatically through the broadcast signal.
1. Press MENU to display the VCR Main Menu.
2. CLOCK should already be highlighted, so press OK (the
Clock menu appears).
3. AUTO CLOCK SET: should already be set to ON. If it’s not,
use the arrow buttons to highlight it and then press the
right arrow button to choose ON.
4. Press the down arrow button until DAYLIGHT SAVING: is
highlighted, and press the right arrow button until the
desired setting is shown (AUTO, ON, or OFF).
• If you choose AUTO, the VCR sets the clock using the
DST information from the broadcast signal.
• If you choose ON, the VCR adjusts the clock when the
Daylight Savings Time begins or ends.
5. Press the down arrow button to highlight TIME ZONE,
and press the right arrow button until your time zone is
shown (AUTO, EASTERN, CENTRAL, MOUNTAIN, PACIFIC,
ALASKA, or HAWAII).
• If you choose AUTO, the VCR sets the time zone using
information from the broadcast signal.
6. When fi nished, press MENU to exit.
7. Turn off the VCR to automatically set the clock.
16566560e book file.indb 1116566560e book file.indb 11 4/27/05 4:51:51 PM4/27/05 4:51:51 PM
To Next Page
Loading...
