RCA DVD/VCR

Chapter 4 33
VCR Features
Info Display
To find out the status of the DVD/VCR, press the INFO
button on the remote control. Each time you press INFO,
different information appears on the screen. See the
following examples.
Note: The date and time must be set before they can be displayed.
1. Press the INFO button to show the on-screen displays.
The time counter is displayed in the DVD/VCR’s front
panel for a short time.
No displays will appear (useful
for dubbing)
2
3
Time counter only (does not
time out)
STOP
May 20, TUE
SP
CH2
6:14PM
1
On-screen display (times out)
2. Press INFO again to display just the time counter on the
TV screen. The time counter remains in the DVD/VCR’s
display panel. This is useful for dubbing tapes.
3. Press the INFO button again to have no displays appear
on the TV screen. The current time is displayed in the
DVD/VCR’s display panel.
Note: Turning off the DVD/VCR player also resets the displays.
0:30:00
16166400.04 VCR Features 5/29/03, 10:02 PM33