RCA F36649

Connections Setup
Step 1: Identifying Your TV's Location
1. If your country is highlighted, press OK on the remote control.
If your country isn't highlighted, press the up or down arrow button on the
remote control to highlight your country and press OK.
2.
Use the number buttons on your remote to enter your zip code.
Press OK when you're finished.
Note: lf yourpostal code contains letters, press the up and down arrow
buttons on your remote to enter letters, andpress the right arrow button
to go to the next spave. The lefi arrow button moves you to the left.
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup. To supply your TV
with the correct TV program listings, the GUIDE Plus+ system needs to know if
your TV is connected to cable.
1. If your TV is connected to cable, highlight Yes and press OK.
If your TV isn't connected to cable, highlight No and press OK (STEP3:
Configuring for a VCR appears).
2.
If you have a cable box connected to this TV, highlight Yes and press OK on
your remote control.
Note: The next series of screens is very important because the GUIDE
Plus+ system must find the correct cable box information in order to
receive the correct TV program listings.
If you don't have a cable box connected to this TV, highlight No and
press OK (STEP 3: Configuring for a VCRappears).
rip
If you're not sure which channel is the
cable box's output channel, consult
the book that came with your cable
box or contact your cable company.
16 Chapter 1